Photo of PT-LX30HEA

PT-LX30HEA

General Power supply 100 - 240 V AC, 50/60 Hz
Power consumption 297 W (0.47 W in Eco standby mode*1, 8.6 W in Network standby mode.)
LCD panel Panel size 16 mm (0.63 inches) diagonal (4:3 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Pixels 786,432 (1,024 × 768) x 3, total of 2,359,296 pixels
Lens 1.2x manual zoom, manual focus, F 2.10-2.25, f 19.11-22.94 mm
Lamp 230 W × 1, lamp replacement cycle (lamp power: High, Normal/Eco): 3,000 hours/4,000 hours*2
Screen size (diagonal) 0.76-7.62 m (30-300 inch)
Brightness*sup3/sup 3,000 lm (lamp power: High)
Center-to-corner uniformity ratio*sup3/sup 85 %
Contrast ratio*sup3/sup 2,500:1 (full on/full off, lamp power: High, Iris: on)
Resolution (RGB) 1,024 × 768 pixels*5
Scanning frequency RGB (analog) fH: 15-100 kHz, fV: 50-100 Hz, dot clock: 140 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)
YPsubB/subPsubR/sub (YCsubB/subCsubR/sub) fH: 15.75 kHz, fV: 60 Hz [480i(525i)] fH: 31.50 kHz, fV: 60 Hz [480p(525p)] fH: 45.00 kHz, fV: 60 Hz [720(750)/60p] fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i] fH: 15.63 kHz, fV: 50 Hz [576i(625i)] fH: 31.25 kHz, fV: 50 Hz [576p(625p)] fH: 37.50 kHz, fV: 50 Hz [720(750)/50p] fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift 6:1
Keystone correction range Vertical: ±30° (±20° when Real-Time Keystone)
Installation Ceiling/floor, front/rear
Terminals COMPUTER IN 1/ S-VIDEO IN D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR /S-VIDEO x 1) (The D-Sub/S-VIDEO conversion cable ET-ADSV is required for inputting S-VIDEO signals.)
COMPUTER IN 2/ MONITOR OUT D-sub HD 15-pin (female) x 1 (RGB×1), (input/output selectable using on-screen menu) (When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
VIDEO IN RCA pin × 1 (Composite VIDEO)
AUDIO IN RCA pin x 2 (L-R x 1) for VIDEO input
COMPUTER AUDIO IN M3 × 1 (L-R x 1)
SERIAL IN D-sub 9-pin (male) × 1 for external control (RS-232C compliant)
LAN RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))
Built-in speaker 3.2 cm round shape × 1, output power: 1 W (monaural)
Noise level 37.0 dB (lamp power: High), 34.1 dB (lamp power: Normal), 29.0 dB (lamp power: Eco)
Cabinet materials Molded plastic
Dimensions (W × H × D) 349 x 105 x 247 mm (13.7" x 4.1" x 9.7") (with legs at shortest position, not including protruding parts)
Weight Approximately 2.99 kg (6.59 lbs)
Operating environment Operating temperature: 5°C-35°C (41°F-95°F), operating humidity: 20%-80% (no condensation)
Supplied accessories Power cord x 1*6, wireless remote control unit, batteries (AAA/R03/LR03 type × 2), VGA cable x 1, filter cover, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software)
NOTE *1 When Standby mode is set to Eco, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal.
*2 The values given for the recommended lamp replacement cycles are maximum. The usage environment affects the lamp replacement cycle.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.
*5 Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*6 Power cords available (x 2) for the PT-LX30HEA/LX30HEA/LX26HEA.