How to Use Panasonic Comfort Cloud App Features
1.0 Home Screen's Features
a. Group name
b. Device name
c. Indoor temperature
d. Operation mode and set temperature
: Auto
:Cool
:Heat
:Fan
: Dry
: iAUTO-X
e. Other group
f. Monitor energy consumption and electricity cost
g. Set up schedule
h. Adding device to the group
i. Power ON/OFF all devices of the group simultaneously
j. Power ON/OFF of each device
k. Check notification
l. Menu
The available features may vary depending on the model.
Turn the device ON / OFF
You can turn power ON / OFF by pressing the power button of the corresponding device.
*Some models are not supported.
Turn multiple devices ON / OFF at once
To turn all devices registered in the same group ON or OFF at once, press the power button in the upper right corner.
*Some models are not supported.
Add new device
By pressing the + button in the group, you can add a new device.
Function switching
Devices
Perform basic operations on the devices tab.
Schedule
Set a weekly timer, etc.
Monitor
Check the status of devices, such as air quality monitors and electricity cost graphs.
Notification
Check the notifications about system maintenance and device errors.
Menu
Access the language settings of the app, account management, FAQs, and more.
2.0 Air Conditioner's Features
a. Device selection
b. Indoor and outdoor temperature
c. Operation mode
d. Set temperature
e. Set temperature change
f. Operation mode change
g. Air flow volume change
h. nanoe™ X operation status*
i. Eco function operation status*
j. Powerful / Quiet operation status*
k. Air swing direction change
l. Power ON/OFF
m. Optional settings
*These features can be set from "Optional settings".
The available features may vary depending on the model.
Setting the operation mode
Press the icon to change the operation mode.
*The available features may vary depending on model.
Setting airflow and direction
Press the icon to change the fan speed and airflow direction.
*The available airflow settings may differ depending on the model.
Optional settings
nanoe™ button
Toggle ON / OFF the nanoe™ operation.
By turning on the nanoe™ when using the fan mode, you can refresh the air in your room.
Powerful / Quiet button
Switch ON / OFF the Powerful / Quiet operation.
Zone control settings
Adjust damper positioning for airflow control
Open/close all your dampers individually or by group
Set up air conditioner weekly timer for zone control
Owner settings
Change the device password and router settings.
*This function is only available to the device owner.
Device settings
Change the device name, group, time zone, and summer time settings.
3.0 Air to Water Heat Pump's Features
a. Outdoor temperature
b. Zone name
c. Indoor temperature
d. Tank temperature
e. Energy consumption and electricity cost monitor
f. Operation status of the heat pump
: In heat pump operation
: In defrost operation
g.Connection status with the boiler
h. Tank water pressure status
: Water pressure is sufficient
: Water pressure is too low
i. Comfort operation
A function to preset the room temperature for each cooling and heating zone, as well as to adjust the hot water temperature to enhance comfort.
j. Eco operation
A function to preset the room temperature for each cooling and heating zone, as well as to adjust the hot water temperature to reduce energy consumption.
k. Operation mode and set temperature for zone
l. Power ON/OFF
m. Set temperature for tank
n. Set up schedule
*The available features may vary depending on model.
o. Operation mode change
p. Zone name
q. Indoor temperature
r. Set temperature
s. Set temperature change
Disclaimer
Device needs to be connected to the Panasonic Comfort Cloud App and an internet connection is required.
The images shown are for illustration purposes only. Actual interface may vary depending on the model’s functionality and the version of Comfort Cloud App.