• MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips.
• MPEG-4 and JPEG dual stream output for simultaneous live monitoring and high resolution recording.
• Progressive output provides clear images, even when the subject is moving.
• High sensitivity: 1.5 lux at F1.3 (Wide).
• Up to 16x automatic electronic sensitivity enhancement.
• Electronic shutter for anti flicker.
• 0.28 ~ 1.0 cm, 3.6x varifocal lens built-in
• Video Motion Detector with 4 programmable detection areas and 3 sensitivity levels.
• Monitor output for easier installation.
• Up to 3x digital zoom controlled by browser.
• Camera title display: Up to 20 alphanumeric characters on browser.
• SD Memory card slot for alarm recording and backup upon network failure. Recorded data can be downloaded by using FTP command.
• Alarm sources including Terminal input, VMD and Panasonic alarm command can trigger actions including SD memory recording/FTP image transfer, E-mail notification, Alarm indication, Terminal output and Panasonic protocol output.
• Built-in microphone for audio (one-way).
• Built-in network interface (10Base-T / 100Base-TX).
• Power over Ethernet (PoE) IEEE 802.3 af.
• Multiscreen: Images from 8 cameras can be displayed in two separate Quad screens (JPEG only). 20 characters camera title is available for each camera.
• FTP client function enables periodic image data transfer or transfer upon alarm.
• Alarm e-mail notification
• Max bit rate/client for MPEG-4 (64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps) combined with Total bit rate control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps / Unlimited) allowing flexible network management.
• Supported Protocol: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, RTP and SNMP.
• Multi-language GUI and setup menu: English, French, Italian, Spanish, German, Russian (PAL), English, French (NTSC), (Installation required except for English).