Foto de Proyector Portátil PT-VW540

Proyector Portátil PT-VW540

Model PT-VW540
Power supply AC 120 V, 50/60 Hz (North America), AC 110 V, 60 Hz (Taiwan), AC 100–240 V, 50/60 Hz (other countries)
Power consumption 385 W [North America], 400 W [other countries]
Standby power consumption Standby Mode (Eco)*² 0.3 W [North America, Taiwan], 0.5 W [other countries]
Standby Mode (Normal) 8 W
LCD Panel Panel size 0.64 inches (1.63 cm) (16:10 aspect ratio)
Display method Transparent LCD panel (× 3, R/G/B)
Pixels 1,024,000 (1280 × 800) × 3, total of 3,072,000 pixels
Lens 1.6x manual zoom (throw ratio: 1.08–1.76:1), manual focus F 1.60–1.90, f 15.31–24.64 mm
Lamp 280 W UHM lamp × 1
Screen size (diagonal) 30–300 inches
Brightness*³ 5,500 lm [input signal: PC, lamp power: Normal, picture mode: Dynamic, Daylight View: OFF, Auto Power Save: OFF]
Center-to-corner uniformity*³ 85%
Contrast*³ 16,000:1 (all white/all black) [input signal: PC, lamp power: Normal, picture mode: Dynamic, Iris: On, Daylight View: OFF, Auto Power Save: OFF]
Resolution 1280 × 800 pixels (Input signals that exceed this resolution will be converted to 1280 × 800 pixels).
Scanning frequency HDMI 480/60i*⁴, 576/50i*⁴, 480/60p, 576/50p, 720/60p, 720/50p, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 1080/60i, 1080/50i, Displayable resolution: 640 x 400 to 1920 x 1200 (non-interlace), Dot clock frequency: 25 MHz to 162 MHz
RGB (analog) Displayable resolution: 640 x 400 to 1920 x 1200 [non-interlace], fH: 15 kHz–91 kHz, fV: 24 Hz–100 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR) fH: 15.73 kHz, fV: 59.94 Hz [480/60i], fH: 15.63 kHz, fV: 50 Hz [576/50i], fH: 31.47 kHz, fV: 59.94 Hz [480/60p], fH: 31.25 kHz, fV: 50 Hz [576/50p], fH: 45.00 kHz, fV: 60 Hz [720/60p], fH: 37.50 kHz, fV: 50 Hz [720/50p], fH: 27.00 kHz, fV: 24 Hz [1080/24p], fH: 27.00 kHz, fV: 48 Hz [1080/24sF], fH: 28.13 kHz, fV: 25 Hz [1080/25p], fH: 33.75 kHz, fV: 30 Hz [1080/30p], fH: 67.50 kHz, fV: 60 Hz [1080/60p], fH: 56.25 kHz, fV: 50 Hz [1080/50p], fH: 33.75 kHz, fV: 60 Hz [1080/60i], fH: 28.13 kHz, fV: 50 Hz [1080/50i]*, HD/SYNC and VD terminals do not support 3 value SYNC.
Video fH: 15.73 kHz/15.63 kHz, fV: 59.94 Hz/50 Hz (NTSC/NTSC4.43/PAL/PAL60/PAL-N/PAL-M/SECAM)
Optical axis shift Vertical 0 to +44 % from center of screen (manual), U/D ratio on top end: 17:1
Keystone correction range Vertical: maximum ±35 ° (auto/manual, input: WXGA), Horizontal: maximum ±35 ° (manual, input: WXGA), Up to a total of ±55 ° during simultaneous horizontal and vertical correction.
Installation Front ceiling/Front desk/Rear ceiling/Rear desk
Terminals HDMI IN HDMI 19-pin × 2 (Deep Color, compatible with HDCP), audio signal: Linear PCM [sampling frequency: 48 kHz/44.1 kHz/32 kHz]
COMPUTER IN 1 D-sub 15-pin (female) x 1 [RGB/Y • PB (CB) • PR (CR)]
COMPUTER IN 2 / MONITOR OUT D-sub 15-pin (female) x 1 [RGB/Y • PB (CB) • PR (CR) (input/output switching)]
VIDEO IN Pin jack x 1
AUDIO IN 1 M3 stereo mini jack x 1
AUDIO IN 2 M3 stereo mini jack x 1
AUDIO IN 3 Pin jack (L/R) x 1
AUDIO OUT M3 stereo mini jack x 1 (monitor out: variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
USB A Type A for DC output x 1 (for power supply, DC 5 V, max. 2 A)*⁵
USB B -
LAN/DIGITAL LINK -
LAN RJ-45 × 1 for network connection, 10Base-T/100Base-TX, compatible with PJLink™
Built-in speaker 4.0 cm (1 1/16”) round shape × 1, output power: 10 W (monaural)
Operation noise*³ 37 dB (lamp power: Normal), 35 dB (lamp power: ECO1), 29 dB (lamp power: ECO2)
Cabinet materials Molded plastic
Dimensions (W × H × D) 389 × 125*⁷ × 332 mm (15-5/16” × 4-29/32”*⁷ × 13-1/16”)
Weight*⁶ Approximately 4.8 kg (10.6 lbs)
Operating environment Operating temperature: 0–40 °C (32–104 °F)*⁸ (altitude: less than 1,200 m [3,937 ft]), 0–30 °C (32–86 °F) (altitude: 1,200–2,700 m [3,937 ft–8,858 ft] ), Operating humidity: 20–80 % (no conden
Supplied accessories Wireless remote control unit × 1, Power cord with power cord holder x 1 (x 2 for UK and Asia), Software CD-ROM × 1 (Operating instructions, Multi Monitoring and Control Software, Logo Transfer Software, Wireless Manager ME software [PT-VZ585N/VW545N/VX615N only]), Batteries (AAA type × 2), RGB cable x 1, Lens cap x 1
Note: *¹ PT-VZ470 is not available in Taiwan.
*² When the Standby Mode is set to ECO, network functions such as Power On via LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
*³ Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*⁴ Pixel-repetition signal (dot clock frequency: 27.0 MHz) only.
*⁵ No output when projector is on standby.
*⁶ Average value. May differ depending on the actual unit.
*⁷ With legs at shortest position.
*⁸ When operating temperature is between 35 °C (95 °F) and 40 °C (104 °F) , lamp power automatically switches to ECO in order to protect the projector.