TK-CJ600-ZMA Faucet Water Purifier with the Long Lasting MicroClear4000 Filter Cartridge
Retail Sales Price:RM 579.00
Add to WishlistRemove from Wishlist
NO ROOM TO ADD MORE PRODUCTS
The wishlist has already reached the maximum number of products
TK-CJ600-ZMA
Secure, Clear Water for 1 Year for a Sustainable, Healthier Life
TK-CJ600 can purify 4,000 L of tap water and with original technology, it removes 17 substances and bacteria. The MicroClear4000 cartridge contains 1.7 times the amount of high performance activated carbon (compared with PJ-225R).
Features
Enjoy Clear Water and Save Money with Just 1 Cartridge
MicroClear4000 cartridge can purify 4,000 L of tap water. With this, you can replace and save money for 4,000 of 1 L plastic bottles a year.
If you use 10 L per day, the cartridge can last for one year, so you don’t have to replace the cartridge so often.
If you use 10 L per day, the cartridge can last for one year, so you don’t have to replace the cartridge so often.
4-stage Filtration Removes 17 Substances and Bacteria
(1) Mesh removes visible red rust and dirt.
(2) High performance activated carbon removes 13 types of impurities contained in water.
(3) Ceramic removes soluble lead contained in water.
(4) Hollow fibre membrane removes bacteria and small particles.
(2) High performance activated carbon removes 13 types of impurities contained in water.
(3) Ceramic removes soluble lead contained in water.
(4) Hollow fibre membrane removes bacteria and small particles.
* Image is for illustrative purposes only
Simulation of Chlorine Removed from Tap Water
Discover the performance of the 4000 L long-life cartridge.
* The products in the video are TK-CJ300 with the MicroClear4000 cartridge (model: TK-CJ600C) and PJ-225R.
Removal of 17 Substances
Free residual chlorine/ Turbidity/ Total trihalomethane/ Bromodichloromethane/ Dibromochloromethane/ Bromoform/ Tetrachloroethylene/ Trichloroethylene/ CAT (agricultural chemicals)/ 2-MIB (mould odour)/ Soluble lead/ Benzene/ Geosmin (musty odour)/ Phenols/ Carbon tetrachloride/ Iron (fine particles)/ Aluminium (neutral)
* This value is based on JIS S 3201 tests and JWPAS B standards
99.999% of Bacteria Are Removed
4-stage water purification system eliminates 99.999% of bacteria and was verified by the Japan Food Research Laboratories.
*In a general bacteria elimination test performed at the Japan Food Research Laboratories with a cartridge used in a Panasonic product.
Tested bacteria: Brevundimonas diminuta
*In a general bacteria elimination test performed at the Japan Food Research Laboratories with a cartridge used in a Panasonic product.
Tested bacteria: Brevundimonas diminuta
Increased High Performance Activated Carbon 170%*!
The MicroClear4000 cartridge contains 51 g, 170%* of high performance activated carbon which is made from our unique technology. This delivers high purification performance and longer cartridge life.
* In weight compared with PJ-225R
Comparison of Activated Carbon: Large Adsorption Area with Nano-sized Pockets
NEW: Increase of surface area is made by nano-sized pocket for more removal
Original technology creates nano-sized pocket that is small as 1 nm which removes 13 impurities, including the fine chemical trihalomethane. Creating more nano-sized pockets and surface area increases the removal of impurities.
* Image is for illustrative purposes only
Conventional: Relatively less of nano-sized pockets
Relatively large nano-sized pocket makes it difficult to adsorb impurities. Those large pockets do not have many nano-sized pockets to adsorb impurities, so the amount of impurities that can be removed is also small.
* Image is for illustrative purposes only
Comparison of Activated Carbon: Renewed Special Surface Treatment
NEW: Special surface treatment prevents impurities from escaping
Our unique surface processing technology has succeeded in creating an appropriate air layer in the nano-sized pocket. Impurities contained in water are released into the air and easily adsorbed on the activated carbon surface.
* Image is for illustrative purposes only
Conventional: Relatively difficult to adsorb impurities on the surface
If there is no air layer in the nano-sized pocket, some impurities can’t be adsorbed on the activated carbon surface. If the air layer is too thick, impurities in the water cannot be released into the air layer.
* Image is for illustrative purposes only
The LCD Shows You the Exact Time to Replace the Cartridge
Each time you turn off the water, the remaining usable capacity will be displayed.
* TK-CJ600 Only
Features for Easier Use
Easy Water Flow Switch
The water flow can be switched with a simple operation. Pictograms reduce switching mistakes.
Easy to Clean Detachable Cover of Tap Water Outlet
The shower part where water stains tend to clog is removable, it can be easily cleaned at any time.
Easy Cartridge Replacement
Cartridge replacement is completed in just 2 easy steps. Rotate the cartridge counter-clockwise and pull to remove it, then do the opposite to install.
Purified Water Output Volume 1.8 L / min
With an output of 1.8 L / min*, you can always use clean water without stress.
* When water pressure is 100 kPa
Get Inspired
Specs
Size and Weight
- Height
- 75mm
- Width
- 135mm
- Depth
- 120mm
- Weight
- 350*g
* The weight is approximate. (Approx. 490 g when full of water.)
- MicroClear
- Made in Japan
4000 L lasting clear water
Removes 17 substances & 99.999% of bacteria with 4-stage filtering
High performance activated carbon developed with Panasonic’s unique technology
Increased high performance activated carbon 170% in weight compared with PJ-225R
The LCD shows you the exact time to replace the cartridge
Product name
-
TK-CJ600
Dimensions (width x depth x height)
-
135 mm (W) x 120 mm (D) x 75 mm (H)
Weight
-
Approx. 350 g (Approx. 490 g when full of water)
Water temperature when using the main unit
-
Purified Water : Under 35 °C (Unpurified/shower : Under 80 °C)
Minimum usable dynamic water pressure
-
70 kPa
Filtration flow volume
-
1.8 L / min [At water pressure 100 kPa]
Cartridge installed in the unit
-
TK-CJ600C-EX
Purification capacity
-
Free residual chlorine
-
4000 L *1
-
-
Turbidity
-
4000 L *2
-
-
Total trihalomethane
-
4000 L *1
-
-
Bromodichloromethane
-
4000 L *1
-
-
Dibromochloromethane
-
4000 L *1
-
-
Bromoform
-
4000 L *1
-
-
Tetrachloroethylene
-
4000 L *1
-
-
Trichloroethylene
-
4000 L *1
-
-
CAT (pesticide)
-
4000 L *1
-
-
2-MIB (mold smell)
-
4000 L *1
-
-
Soluble lead
-
4000 L *1
-
-
Benzene
-
4000 L *1
-
-
Geosmin (mold smell)
-
4000 L *1
-
-
Phenols
-
4000 L *1
-
-
Carbon tetrachloride
-
4000 L *3
-
Removable substances
-
Iron (particulate form)
-
Can be removed. *4
-
-
Aluminum (neutral)
-
Can be removed. *4
-
Replacement timing guideline for the filter (cartridge)
-
Approx. 1 year (10 L of purified water used a day) [Approx. 6 months (20 L of purified water used a day)] *5
Type of material used
-
ABS resin
Filter material
-
Non-woven fabric filter, Activated carbon, Ceramic, Hollow fiber membrane
Components which cannot be filtered out
-
Iron dissolved in water, heavy metals (silver, copper, etc.), salt (seawater)
Note
-
・ All figures given are for a water temperature of 20 °C.・ This product cannot convert hard water into soft water.* 1: This value is for a removal rate of 80 % based on JIS S 3201 tests.* 2: This value is for a filtration flow volume of 50 % based on JIS S 3201 tests.* 3: This value is for a removal rate of 80 % based on specification standard tests (JWPAS B standards) stipulated by the Japan Water Purified Association (JWPA).* 4: This substance is for a removal rate of 80 % based on specification standard tests (JWPAS B standards) stipulated by the Japan Water Purified Association (JWPA). Note that it is not stipulated as part of purification capacity.* 5: This may be significantly shorter depending on the volume of water used, water quality and water perssure.