Eliminates frequently encountered odours

nanoe™ X particles, which are smaller than steam particles, penetrate deep into fabrics, allowing for highly effective deodorisation.1–8 Hydroxyl radicals reach the sources of the odours and inhibit them.
How nanoe™ X works

nanoe™ X reaches odours embedded in fabrics.

Hydroxyl radicals inhibit odour-causing substances.

Fabrics are deodorised.1–8
Effects


nanoe™ X reduced pet odour intensity
by 1.5 levels in 1 hour.

nanoe™ X reduced durian odour intensity
faster than natural reduction.

nanoe™ X reduced BBQ odour intensity
faster than natural reduction.

nanoe™ X reduced perspiration odour
intensity significantly in 1 hour.

nanoe™ X reduced refuse odour intensity in 0.5 hours.

nanoe™ X reduced damp odour intensity to
a hardly noticeable level in 1 hour.

nanoe™ X reduced scalp odour intensity
significantly in 6 hours.
1Testing organisation: Panasonic Product Analysis Center. Testing method: Verified using the six-level odour intensity indication method in an approximately 23㎥-sized test chamber. Deodorisation method: nanoe™ released. Target odour: Surface-adhered cigarette smoke odour. Test result: Odour intensity reduced by 2.4 levels in 12 minutes. (4AA33-160615-N04)
2Testing organisation: Panasonic Product Analysis Center. Testing method: Verified using the six-level odour intensity indication method in an approximately 23㎥-sized test chamber. Deodorisation method: nanoe™ released. Target odour: Surface-adhered pet odour. Test result: Odour intensity reduced by 1.5 levels in 1 hour. (4AA33-160315-A34)
3Testing organisation: Panasonic Product Analysis Center. Testing method: Verified using the six-level odour indication method in an approximately 23㎥-sized test chamber. Deodorisation method: nanoe™ released. Target odour: Surface-adhered durian odour. Test result: Odour intensity reduced by 1 level in 0.5 hours. (1V332-180402-K01)
4Testing organisation: Panasonic Product Analysis Center. Testing method: Verified using the six-level odour intensity indication method in an approximately 23㎥-sized test chamber. Deodorisation method: nanoe™ released. Target odour: Surface-adhered BBQ odour. Test result: Odour intensity reduced by 1.2 levels in 2 hours. (4AA33-151221-N01)
5Testing organisation: Panasonic Product Analysis Center. Testing method: Verified using the six-level odour intensity indication method in an approximately 23㎥-sized test chamber. Deodorisation method: nanoe™ released. Target odour: Surface-adhered perspiration odour. Test result: Odour intensity reduced by 1.1 levels in 1 hour. (Y16HM016)
6Testing organisation: Odour and Aroma Design Course, Department of Integrated Informatics, Faculty of Informatics, Daido University. Testing method: Verified using the six-level odour intensity indication method in an approximately 23㎥-sized test chamber. Deodorisation method: nanoe™ released. Test substance: Simulated body odour of middle-aged and senior citizens adhered to pillow cover. Test result: Odour intensity reduced by 0.65 levels in 6 hours.
7Testing organisation: Panasonic Product Analysis Center. Testing method: Verified using the six-level odour intensity indication method in an approximately 23㎥-sized test chamber. Deodorisation method: nanoe™ released. Target substance Surface-attached refuse odour. Test result: Methylmercaptan: Odour intensity reduced by 1.2 levels in 0.5 hours (1V332-18220-K11). Trimethylamine: Odour intensity reduced by 1.4 levels in 0.5 hours. (1V332-180220-K12)
8Testing organisation: Panasonic Product Analysis Center. Testing method: Verified using the six-level odour intensity indication method in an approximately 23㎥-sized test chamber. Deodorisation method: nanoe™ released. Target substance: Surface-adhered damp odour. Test result: Odour intensity reduced by 1.7 levels in 0.5 hours. (Y16RA002)
Deodorisation effect varies according to the environment (temperature and humidity), operation time, odour, and fabric types. nanoe™ does not eliminate toxic substances from cigarettes (carbon monoxide, etc.). Odours that are continuously generated (e.g., building material odours and pet odours) are not completely eliminated.
Inhibits activity of airborne, adhered
bacteria⁹-¹¹ & viruses¹²-¹⁴

Viruses and bacteria can have various adverse effects on us.
How nanoe™ X works

nanoe™ X reaches viruses.

Hydroxyl radicals denature virus proteins.

Viral activity is inhibited.9–14
Effects






9Airborne bacteria (Staphylococcus aureus). Testing organisation: Kitasato Research Center for Environmental Science. Testing method: The number of bacteria was measured after direct exposure in an approximately 25 m3-sized airtight test chamber. Inhibition method: nanoe™ released. Target substance: Airborne bacteria. Test result: Inhibited by at least 99.7% in 4 hours. (24_0301_1)
10Adhered bacteria (O157). Testing organisation: Japan Food Research Laboratories. Testing method: Measured the number of bacteria adhered to a cloth in an approximately 45 L-sized airtight test chamber. Inhibition method: nanoe™ released. Target substance: Adhered bacteria. Test result: Inhibited by at least 99.99% in 1 hour. (208120880_001)
11Adhered bacteria (MRSA). Testing organisation: Japan Food Research Laboratories. Testing method: Measured the number of bacteria adhered to a cloth in an approximately 45-L-sized airtight test chamber. Inhibition method: nanoe™ released. Target substance: Adhered bacteria. Test result: Inhibited by at least 99.99% in 1 hour. (208120880_002)
12Airborne viruses (bacteriophageΦχ174). Testing organisation: Kitasato Research Center for Environmental Science. Testing method: The number of viruses was measured after direct exposure in an approximately 25 m3-sized airtight test chamber. Inhibition method: nanoe™ released. Target substance: Airborne viruses. Test result: Inhibited by at least 99.7% in 6 hours. (24_0300_1)
13Adhered virus (Influenza virus H1N1 subtype). Testing organisation: Kitasato Research Center for Environmental Science. Testing method: Measured the number of viruses adhered to a cloth in an approximately 1 m3-sized airtight test chamber. Inhibition method: nanoe™ released. Target substance: Adhered viruses. Test result: Inhibited by at least 99.9% in 2 hours. (21_0084_1)
14Adhered viruses (Poliovirus type1(Lsc-2ab)). Testing organisation: Kitasato Research Center for Environmental Science. Testing method: Measured the number of viruses adhered to a cloth in an approximately 45 L-sized airtight test chamber. Inhibition method: nanoe™ released. Target substance: Adhered viruses. Test result: Inhibited by at least 99.7% in 2 hours. (22_0096)
Results may vary based on usage and seasonal and environmental variables (temperature and humidity). nanoe™ X and nanoe™ inhibit activity or growth of pollutants, but do not prevent illness.
Inhibits airborne & adhered mould activity

Various types of airborne mould15 and even adhered mould16 found indoors can be reached and inhibited by nanoe™ X.
How nanoe™ X works

nanoe™ X reaches mould.

Hydroxyl radicals denature mould proteins.

Mould growth is inhibited.15, 16
Effects



15Testing organisation: Japan Food Research Laboratories. Testing method: Measured the amount of mould inhibited in an approximately 23 m3-sized test chamber. Inhibition method: nanoe™ released. Target substance: Airborne mould. Test result: Inhibited by at least 99% in 1 hour. (205061541-001)
16Testing organisation: Japan Food Research Laboratories. Testing method: Measured mould adhered to a cloth. Inhibition method: nanoe™ released. Target substance: Adhered mould. Test result: Inhibited by at least 99.5% in 8 hours. (11038081001-02)
17Kosuke Takatori, 2002 (Mould Inspection Manual Colour Illustrated Catalogue) p. 382 TECHNO SYSTEMS, Inc.
18Kosuke Takatori, 2002 (Mould Inspection Manual Colour Illustrated Catalogue) p. 44-45 TECHNO SYSTEMS, Inc.
Results may vary based on usage and seasonal and environmental variables (temperature and humidity). nanoe™ X and nanoe™ inhibit activity or growth of pollutants, but do not prevent illness.
Inhibits pet-derived allergens and other major allergens

In addition to allergens19 such as dog/cat dander19, mite faeces/carcasses19, and airborne mould19, other major allergens19 can also be inhibited.
How nanoe™ X works

nanoe™ X reaches allergens.

Hydroxyl radicals denature allergen proteins.

Allergens are inhibited.19
Effects
Inhibition19 effect indicated by disappearance of coloration following reaction with allergens






![[ Effects ]](/content/dam/Panasonic/Global/Learn-More/nanoe/all/how/effects/4-1-1_P+.jpeg)
19Testing organisation: Panasonic Product Analysis Center. Testing method: Verified using the electrophoresis method in an approximately 23 m3-sized test chamber. Inhibition method: nanoe™ released. Target substances: Allergens (Dermatophagoides pteronyssinus, Dermatophagoides farina, Cedar, Cypress, Orchard grass, Ragweed, Alnus japonica, Japanese white birch, Artemisia, Olive, Juniper, Casuarina, Miscanthus, Timothy grass, Humulus japonicus, Alternaria, Aspergillus, Candida, Malassezia, cockroach, moth, dog (dander), cat (dander)). Test result: Inhibitory effect confirmed in 24 hours. (4AA33-160615-F01, 4AA33-170301-F15, 4AA33-151001-F01, 4AA33-151028-F01, 4AA-33-160601-F01, 4AA33-160601-F02, 4AA33-160701-F01, 1V332-180301-F01, 4AA33-160615-F02, 4AA33-160615-F03, 4AA33-160620-F01)
Results may vary based on usage and seasonal and environmental variables (temperature and humidity).
nanoe™ X and nanoe™ inhibit activity or growth of pollutants, but do not prevent illness.
Inhibits pollens globally all year

nanoe™ X is effective in inhibiting20 a variety of pollens globally all year.
The inhibition effect has been confirmed for the 13 varieties shown below.
Types of pollen that nanoe™ X inhibits


Calendar for major pollens
Various pollens appear in different regions at different times of year.
How nanoe™ X works

nanoe™ X reaches pollen.

Hydroxyl radicals denature pollen proteins.

Pollen is inhibited.20
20Testing organisation: Panasonic Product Analysis Center. Testing method: Verified using the electrophoresis method in an approximately 23 m3-sized test chamber. Inhibition method: nanoe™ released. Test substances: Cedar, Cypress, Orchard grass, Ragweed, Alnus japonica, Japanese white birch, Artemisia, Olive, Juniper, Casuarina, Miscanthus, Timothy grass, Humulus japonicus pollen. Test result: Inhibitory effect was confirmed in 24 hours. (4AA33-151015-F01, 4AA33-151028-F01, 4AA33-160601-F01, 4AA33-160601-F02, 4AA33-160701-F01, 1V332-180301-F01)
Results may vary based on usage and seasonal and environmental variables (temperature and humidity).
nanoe™ X and nanoe™ inhibit activity or growth of pollutants, but do not prevent illness.
Breakdown/inhibition of hazardous substances²¹
found in PM 2.5

Breakdown of hazardous substances such as aromatic carboxylic acid (benzoic acid), paraffin (hexadecane) has been verified.21

How nanoe™ X works

nanoe™ X reaches hazardous substance.

Hydroxyl radicals denature hazardous substance proteins.

Hazardous substance is inhibited.21
Effects


![[ Effects ]](/content/dam/Panasonic/Global/Learn-More/nanoe/all/how/effects/4-1-1_P++.jpeg)
21Testing organisation; Panasonic Product Analysis Center. Testing method: measured the amount of adhered organic substances in an approximately 23 m3-sized test chamber. Inhibition method: nanoe™ released. Test results: Aromatic carboxylic acid (benzoic acid) broken down at least 99% in approximately 8 hours. (Y17NF096) Paraffin (hexadecane) broken down at least 99% in approximately 16 hours. (Y17NF089)
Results may vary based on usage, and seasonal and environmental variables (temperature and humidity).
nanoe™ X and nanoe™ inhibit activity or growth of pollutants, but do not prevent illness.
Moisturised skin and more lustrous hair

nanoe™ X combines with natural sebum to coat the skin, leading to smooth, well-hydrated skin.22-23 Also, the abundant moisture found in nanoe™ X hydrates the hair, contributing to straighter, sleeker hair.24
Leads to smooth, well-hydrated skin

Testing showed an improvement in skin moisture content equivalent to a 20-percent increase in humidity23-24

Hair is smoother and lustrous with nanoe™ X.24

22Testing organisation: Panasonic Product Analysis Center. Testing method: Rest period–90 minutes; nanoeTM X exposure time–60 minutes. Retention–60 minutes. Test subjects: 8 women aged 30–49 with dry to normal skin. Test result: Change in skin moisture content equivalent to a 20-percent increase from 30% to 50% in environmental humidity. (USG-KT-14K-012-TM)
23Testing organisation: FCG Research Institute, Inc. Testing method: Of 20 women 40 ± 2 years old, 10 women used a nanoeTM device at home for 28 days, while the other 10 women used a device with no nanoeTM device for 28 days at home. (19104)
24Testing organisation: Panasonic Product Analysis Center. Testing method: Approximately 46 m3-sized test chamber, room temperature 25 degrees Celsius, humidity 40%. 6 bundles of hair were suspended 2 m from a nanoeTM device, with repeated operation of the nanoeTM device: 8 hours on and 16 hours off. (USD-KS-15S-009-TM) Method: nanoeTM X released. Target substance: Hair.
Individual results may vary based on usage and seasonal and environmental variables (temperature and humidity).
Pesticide residue reduction

nanoe™ X dispersed throughout the refrigerator breaks down pesticide residue. A water rinse after storage in a refrigerator equipped with nanoe™ X removes more pesticide residue than a water rinse alone.
How nanoe™ X works
nanoe™ X hydroxyl radicals break down pesticide particles so residues can be easily washed away.

Pesticide atoms have a strong bond that repels water.

Hydroxyl radicals break down this bond (hydrophilisation).

This allows pesticide residues to be rinsed off easily.
Effects
Pesticide residue reduction rate after rinse (3 days later)26.


26Test organisation: TECHNO SCIENCE Corporation. Certificate number: 20020273-001. Tested pesticides: Diniconazole and Azoxystrobin. Test method (n=2): 3 days’ exposure with and without nanoe™ X, and after a rinse with water. Test conditions: In a 400-L square chamber, at a temperature of 5°C and humidity of over 70%, with nanoe™ X repeatedly turned on for 20 minutes then off for 40 minutes. Test process: 1) Pesticide was applied to a φ2.8 cm dish. 2) The dish was placed in the 400-L square chamber. 3) After 3 days, the dish was washed with water. 4) The pesticide residue on the dish was measured. 5) Analysis was conducted with LC/MS. Test results: Diniconazole residue reduced by 77.7% with nanoe™ X, 44.4% without nanoe™ X. Azoxystrobin reduced by 59.3% with nanoe™ X, 12.5% without nanoe™ X. Note: The effect of nanoe™ X can be expected to differ depending on the fruit or vegetable.