EY78A1X57 DRILL ONLY
| DESCRIPTION | Description | Cordless Rotary Hammer Drill & Driver |
|---|---|---|
| Typical Application | Lighting equipment installation Conduit pipe installation Switch box installation | |
| Skin Only Option Available (battery and charger not included) | - | |
| POWER SUPPLY | Voltage (V) | Dual: 14.4 / 18 |
| Battery Pack Type | see Optional Accessories | |
| Amps (Ah) | see Optional Accessories | |
| Charge Time (mins) | Full: 65 (using EY0L81B charger) Usable: 50 | |
| Overheat Protection System | Yes | |
| Speed - High / Hard at No Load (rpm) | 0 - 1000 (rotation only) | |
| Speed - Medium at No Load | - | |
| Speed - Low / Soft at No Load (rpm) | - | |
| Speed - Impact Mode at No Load (rpm) | - | |
| Speed - Drill & Driver Mode at No Load (rpm) | - | |
| Impact - High Mode (ipm) | - | |
| Impact - Medium (ipm) | - | |
| Impact - Soft Mode (ipm) | - | |
| Maximum Torque - Impact Mode (Nm) | - | |
| Maximum Torque - Drill & Driver Mode (Nm) | - | |
| Maximum Torque - Stalling (Nm) | - | |
| Maximum Torque - Instant (Nm) | - | |
| Maximum Torque - High (Nm) | - | |
| Maximum Torque - Medium (Nm) | - | |
| Maximum Torque - Low (Nm) | - | |
| Ejection Pressure (kgf) | - | |
| Capacity (ml) | - | |
| FEATURES | Tough Tool - IP56 Approval | Yes |
| Safety Switch Lock | - | |
| Clutch Stages | 5 plus drill Clutch Torque: 1.5 - 5.4 (1.0 per stage) | |
| Electric Brake | - | |
| Chuck Type | - | |
| No of Speeds | - | |
| Variable Speed Control / Reversible | - | |
| Slow Start Switch | Yes | |
| LED Light | Yes | |
| Ergonomic Design | - | |
| Additional Design Features | SDS-plus bit system High speed concrete drilling by air type (cup piston method) hammer Complete concrete plug installation | |
| FEATURES - DRILL amp DRIVER | Maximum Drill Diameter - Wood (mm) | - |
| Maximum Drill Diameter - Metal (mm) | - | |
| Maximum Drill Diameter - Concrete (mm) | - | |
| Maximum Holesaw (mm) | - | |
| Maximum Screws Driving - Wood (mm) | - | |
| Maximum Screws Driving - Self-Drilling Screw (mm) | - | |
| Maximum Screws Driving - Machine Screw (mm) | - | |
| FEATURES - HAMMERING | Hammering Force - Soft Mode (kN) | - |
| Hammering Force - Hard Mode (kN) | - | |
| Blows Per Minute - Hard Mode | 0 - 3800 (rotation with hammering) | |
| Blows Per Minute - Soft Mode | - | |
| FEATURES - GRINDING amp CUTTING | Grinding Wheel Diameter (mm) | - |
| Blade Diameter (mm) | - | |
| Maximum Cutting Depth (mm) | - | |
| Stroke Per Minute at No Load | - | |
| Stroke Length (mm) | - | |
| Cutting Performance - Wood (mm) | - | |
| Cutting Performance - Mild Steel (mm) | - | |
| Cutting Performance - Aluminium (mm) | - | |
| GENERAL | Dimensions - L x H x W (mm) | 249 x 264 x 64 |
| Weight (kg) | 2.45 | |
| ACCESSORIES | Standard | Dust Collection Cup EY9X005E57 |
| Optional | 18V Battery Pack (3.3 Ah Li-ion Battery Type R) EY9L50B57 14.4V Battery Pack (1.5 Ah Li-ion Battery Type E) EY9L42B57 14.4V Battery Pack (3.3 Ah Li-ion Battery Type R) EY9L44B57 Charger for Li-ion EY0L81B57 |
Copyright © Panasonic Australia Pty Ltd