Electrical Safety Recall relevant to Panasonic CP-JNF01FW Smart Pet Feeder and CP-JNW01FW Pet Water Fountain please click here
PT-AE8000
| PANEL | Panel type | LCD |
|---|---|---|
| Panel size - Diagonal (mm) | 18.7 (16:9 aspect ratio) | |
| Display method | Transparent LCD Panel (x 3, R / G / B) | |
| Drive method | Active Matrix | |
| Pixels | 2,073,600 (1920 x 1080) x 3 Total of 6,220,800 | |
| Pixel configuration | - | |
| DISPLAY | DISPLAY | 4000 (Lamp Power: Normal) 5000 (Lamp Power: Eco) |
| Lens | Powered Zoom (2x) / Focus Lenses 1.35:1 - 2.7:1, F 1.9 - 3.2, f 22.4 - 44.8 mm | |
| Throw ratio | - | |
| Lamp (W) | 220 UHM Lamp | |
| Screen size - Diagonal (m) | 2D Projection: 1.02 - 7.62 3D Projection: 1.02 - 5.08 | |
| Colours | Full Colour (1,073,741,824 colours) | |
| Brightness (lumens) | 2400 | |
| Center-to-corner uniformity (%) | 85 | |
| Contrast ratio | 500,000:1 (Full On / Full Off) | |
| Resolution (pixels) | 1920 × 1080 | |
| SCANNING FREQUENCY | SD-SDI | - |
| HD-SDI | - | |
| Dual-link HD-SDI | - | |
| 3G-SDI | - | |
| HDMI / DVI-D | HDMI 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p | |
| RGB | f H : 15 – 74 kHz, f V : 24 – 85 Hz, Dot clock: 154 MHz or lower | |
| YP B P R (YC B C R) | f H : 15.75 kHz, f V : 59.9 Hz [525i (480i)] f H : 15.6 kHz, f V : 50 Hz [625i (576i) f H : 31.5 kHz, f V : 59.9 Hz [525p (480p)] fH: 31.3 kHz, fV: 50 Hz [625p (576p)] f H : 45 kHz, f V : 60 Hz [750 (720)/60p] fH: 37.5 kHz, fV: 50 Hz [750 (720)/50p] f H : 33.8 kHz, f V : 60 Hz [1125 (1080)/60i] fH: 28.1 kHz, fV: 50 Hz [1125 (1080)/50i] f H : 27.00 kHz, f V : 24 Hz [1125 (1080)/24p] fH: 67.50 kHz, fV: 60 Hz [1125 (1080)/60p] f H : 56.3 kHz, f V : 50 Hz [1125 (1080)/50p] | |
| Video / S-Video | f H : 15.75 kHz, f V : 59.9 Hz [NTSC / NTSC4.43 / PAL-M / PAL60] f H : 15.6 kHz, f V : 50 Hz [PAL / PAL-N / SECAM] | |
| OPTICAL OFFSET | Optical axis shift | Vertical: ±100%, Horizontal: ±26% |
| Keystone correction range | Vertical: Approx. ±30° | |
| Keystone correction range with optional geometry manager pro | - | |
| Installation | Ceiling / Desk, Front / Rear | |
| BUILT-IN SPEAKER | Size (cm) | - |
| Output power (W) | - | |
| TERMINALS | SDI 1 In | - |
| SDI 2 In | - | |
| 3D Sync. In / Out | - | |
| 3D Sync. Out | - | |
| DVI-D In | - | |
| HDMI IN | HDMI connector × 3 HDMI™ (Deep Color, x.v.Color™, CEC), HDCP compliant, supports HDAVI Control Version 5 | |
| Computer 1 IN | D-sub HD 15-pin × 1 | |
| Computer 1 IN - RGB | R, G, B: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms, HD / SYNC, VD: TTL (positive / negative polarity compatible) Note: HD / SYNC, and VD terminals do not accept tri-level sync signals | |
| Computer 1 IN - YP B P R (YC B C R) | Y: 1.0 Vp-p (including sync signal) P B /P R : 0.7 Vp-p, 75 ohms | |
| Computer 2 IN | COMPONENT IN RCA pin × 3 (YPBPR / YCBCR) Y: 1.0 Vp-p, 75 ohms PB/CB, PR/CR: 0.7 Vp-p, 75 ohms | |
| Computer 2 IN - RGB | - | |
| Computer 2 IN - YP B P R (YC B C R) | - | |
| Computer (RGB) 2 IN / 1 OUT R, G, B / 5BNC / VIDEO IN |
- | |
| Trigger IN / OUT 3D Shutter OUT |
M3 × 2, 12 V, Max. 100 mA (input / output / 3D shutter output selectable using on-screen menu) | |
| Video IN | RCA pin x 1, 1.0 Vp-p, 75 ohms | |
| Video OUT | - | |
| S-Video IN | Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms | |
| Audio IN | - | |
| Computer audio IN 1 | - | |
| Computer audio IN 2 | - | |
| Computer audio IN 3 | - | |
| Video / S-Video Audio IN | - | |
| Monitor OUT | - | |
| Audio OUT | - | |
| Serial IN | D-sub 9-pin × 1 for external control (RS-232C compliant) | |
| Serial OUT | - | |
| Remote 1 IN | - | |
| Remote 1 OUT | - | |
| Remote 2 IN | - | |
| LAN | - | |
| USB | - | |
| Wireless | - | |
| Optional | Replacement Lamp Unit ET-LAA410 Ceiling Mount Bracket ET-PKA110H (for high ceilings) Ceiling Mount Bracket ET-PKA110S (for low ceilings) 3D IR Transmitter ET-TRM110 3D Eyewear (medium size) TY-EW3D3M | |
| POWER | Power supply (V AC) | 100 - 240 AC, 50 / 60 Hz |
| Power consumption (W) | 310 0.08 Standby Mode | |
| Power cord length (m) | 3 | |
| GENERAL | Cabinet materials | Moulded Plastic (PC+ABS) |
| Dimensions - W x H x D (mm) | 48 x 138 x 28.3 | |
| Weight (kg) | Approx. 8.7 | |
| Operating noise (dB) | 22 (Lamp Power: Eco) | |
| Operating temperature (o C) | 0 – 40 | |
| Operating humidity (%) | 20 – 80 (no condensation) | |
| Filter | - | |
| Other | - | |
| REMOTE CONTROL UNIT | Power supply (V) | 3 DC (R6 / AA type battery) × 2 |
| Operation range (m) | Approx. 7 (when operated from directly in front of the signal receptor) | |
| Weight - Including batteries (g) | Approx. 125 | |
| ACCESSORIES | Standard | Power Cord x 1 (x 2 for PT-AE8000EA) Wireless Remote Control Unit Batteries for Remote Control (AA / R6 type × 2) Lens Cover |
Copyright © Panasonic Australia Pty Ltd
Electrical Safety Recall relevant to Panasonic CP-JNF01FW Smart Pet Feeder and CP-JNW01FW Pet Water Fountain please click here