F3 Type Mid Static Adaptive Ducted (Mark3)
Flexible installation design including vertical installation, and excellent air purification functionality
F3 Type Mid Static Adaptive Ducted units are slim and boast excellent performance, making them ideal for installation environments with low ceilings and vertical installations. They also offer the next level of air quality thanks to the nanoe X Generator Mark3, effective even in large spaces.
Please Select Your User Type
F3 Type Mid Static Adaptive Ducted (Mark3)
Specifications
S-22MF3E5AN
S-28MF3E5AN
S-36MF3E5AN
S-45MF3E5AN
S-56MF3E5AN
S-60MF3E5AN
S-73MF3E5AN
S-90MF3E5AN
S-112MF3E5AN
S-140MF3E5AN
S-160MF3E5AN
nanoe X Generator Mark3- R410A
- DC motor
- Drain Pump
Flexible installation with horizontal/vertical mounting and rear/bottom air inlet
Space saving 250 mm height
DC fan motor for variable external static pressure control up to 150 Pa
Industry-leading low sound levels from 20 dB (A)
Improved drain pan suitable for both horizontal/vertical installation
nanoe™ X: 100 times more nanoe™ particle for wide commercial space
Documents
Combination
Case Studies
Features
|
Cooling/Heating kW (rated) |
2.2/2.5 |
2.8/3.2 |
3.6/4.2 |
4.5/5.0 |
5.6/6.3 |
6.0/7.1 |
7.3/8.0 |
9.0/10.0 |
11.2/12.5 |
14.0/16.0 |
16.0/18.0 |
|
Cooling/Heating Btu/h (rated) |
7,500/8,500 |
9,600/10,900 |
12,300/14,300 |
15,400/17,100 |
19,100/21,500 |
20,500/24,200 |
24,900/27,300 |
30,700/34,100 |
38,200/42,700 |
47,800/54,600 |
54,600/61,400 |
|
Model No. |
S-22MF3E5AN |
S-28MF3E5AN |
S-36MF3E5AN |
S-45MF3E5AN |
S-56MF3E5AN |
S-60MF3E5AN |
S-73MF3E5AN |
S-90MF3E5AN |
S-112MF3E5AN |
S-140MF3E5AN |
S-160MF3E5AN |
|
|
|
|
|
|
|
|
|
|
|
A New Level of Air Quality with nanoe X Generator Mark3
24-hour nanoe™ X Air Protection
nanoe™ X inhibits certain bacteria, viruses, pollens, allergens, mould, and hazardous substances contained in PM2.5. Providing effective deodorisation and improving the quality of your air. nanoe™ X functions in both cooling and fan modes, and is maintenance-free, helping you enjoy 24 hours of quality air while keeping your costs down.
Higher Concentration, Even in Large Space
The amount of hydroxyl radicals generated increased 100 times, compared to the original nanoe™, which achieves greater effectiveness even in large spaces of 112 m².
Conditions of the simulation ･Room size: 112 m² ･Room height: 2.4 m ･Inspection model: 4-Way Cassette ･Position of IDU: Centre
Note: The result is based on the conditions for the simulation and it may differ from the concentration measured in an actual room. nanoe™ particles are extremely tiny in nano-meter size. They cannot be seen, so the concentration image is solely for illustrative purposes.
Note: The result is based on the conditions for the simulation and it may differ from the concentration measured in an actual room. nanoe™ particles are extremely tiny in nano-meter size. They cannot be seen, so the concentration image is solely for illustrative purposes.
Effective at Eliminating Odours in Only 30 Minutes
The nanoe X Generator Mark3 reduces odours by as much as 1.8 levels* in just 30 minutes. This is half the time required to achieve the same effect compared to the conventional nanoe X Generator Mark 2.
*A 1.8 level decrease in odour intensity is equivalent to a reduction of 95% or more.
[Odour intensity] 5: Very strong odour, 4: Strong odour, 3: Easily detectable odour, 2: Weak, recognisable odour (cognitive threshold concentration), 1: Barely detectable odour (detection threshold concentration), 0: No odour
Note: The test result is obtained using a 4-Way Cassette. **Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P80U6 equipped with a nanoe X Generator Mark2 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 60 minutes (L19YK032-01) ***Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P160U6 equivalent tester equipped with a nanoe X Generator Mark3 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 30 minutes (R21HM003-0)
[Odour intensity] 5: Very strong odour, 4: Strong odour, 3: Easily detectable odour, 2: Weak, recognisable odour (cognitive threshold concentration), 1: Barely detectable odour (detection threshold concentration), 0: No odour
Note: The test result is obtained using a 4-Way Cassette. **Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P80U6 equipped with a nanoe X Generator Mark2 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 60 minutes (L19YK032-01) ***Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P160U6 equivalent tester equipped with a nanoe X Generator Mark3 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 30 minutes (R21HM003-0)
Benefit from nanoe™ X Even with Long, Curved Ductwork
Combined with the strong static pressure, this model ensures pristine nanoe™ X air travels unaffected, even through multiple duct shapes at lengths of 10 meters, as well as making them ideal for use in larger spaces.
Flexible Installation to Maximize the Use of Spaces
Industry-Leading Vertical Installation That Accommodates Even Limited Ceiling Heights
Our groundbreaking drain pan design delivers a ducted unit that can be mounted horizontally or vertically without the need for alterations*. Even when ceiling space for ductwork is limited, the slim design allows for discrete placement away from rooms for total installation flexibility.
*Please refer to Installation Manual for full details.
Compact Enough to Allow Ceiling Height to be Maintained
The indoor units have also been completely renewed, offering a 40 mm height reduction to only 250 mm* and a weight reduction of up to 10%, all while maintaining the same powerful 150 Pa. Its compact 250 mm-high body means it takes up less space behind the ceiling, allowing for a higher ceiling in rooms.
*Compared to the conventional model range.
Enables Air Conditioning Without Disturbing Quiet Spaces
Features a low sound pressure level of 20 dB(A)*, as quiet as that of rustling leaves. It is ideal for quiet and relaxing spaces, such as hotel lobbies and guest rooms, thanks to its superior quiet performance.
*For 2.2-4.5 kW type and the airflow rate in low mode.
ECONAVI Sensor
Providing outstanding energy-saving performance, Panasonic’s inverter VRF System can be connected to ECONAVI to detect when energy is being wasted. ECONAVI senses the presence or absence of people and the level of activity in each area of an office. When unnecessary heating or cooling is detected, indoor units are individually controlled to match office conditions for energy-saving operation.
1. Detection of the level of activity enables optimum power saving.
2. Sensor is remotely located to maximise the energy-saving effect.
Leading Control Options
Panasonic air conditioning systems allow flexible control options. Individual, centralised, Cloud control and WLAN control are all possible. Please consult with a Panasonic air conditioning specialist for advice as to which control solution best suits your system requirements.
Flexible Installation
The Panasonic Mid Static Adaptive Ducted unit sits only 250 mm high. This market-leading height enables easy installation into compact ceiling spaces.
Optimal airflow set-up is possible depending on ducting design and conditions.
Note: Please refer to technical databook for detail.
The air inlet position is adjustable via a movable panel to allow both rear or bottom entry, depending on the duct installation.
Using a high-lift drain pump, drain piping can be elevated up to 690 mm from the base of the unit.
An inspection port (450 x 450 mm or more) is required at the lower side of the indoor unit body (field supply).
