Battery Grip DMW-BG1E
Add to WishlistRemove from Wishlist
NO ROOM TO ADD MORE PRODUCTS
The wishlist has already reached the maximum number of products
DMW-BG1E
Battery Grip DMW-BG1
Battery Grip for extended shooting time. Compatible with the LUMIX S5II (DC-S5M2), LUMIX S5IIX (DC-S5M2X) and LUMIX G9II (DC-G9M2).
Features
Extended battery life for active outdoor shooting
By using two batteries — one in the camera and the other in the grip*, the DMW-BG1 doubles the battery life for extended shooting.
*A battery pack is not included in the DMW-BG1.
Easy operation, both vertical and horizontal
Easy to grip and access buttons in both horizontal and vertical orientations. The camera also features an 8-directional joystick with the same ease of operation as the camera body.
Specs
Size and Weight
- Height
- 45.2mm
- Width
- 132.4mm
- Depth
- 67.6mm
- Weight
- 321.8g
All values are approximate. Weight with battery. Terminal cap is excluded. Body only 242.1g (with terminal cap). Dimensions exclude protrusions.
Extended battery life
Buttons and joystick can be used in the same way as the LUMIX S5II (DC-S5M2), LUMIX S5IIX (DC-S5M2X) and LUMIX G9II (DC-G9M2)
Dust, splash and freeze-resistant design
Dimensions (W x H x D)
-
Approx. 132.4 x 45.2 x 67.6 mm / 5.21 x 1.78 x 2.66 inch
(excluding the projecting parts)
Weight
-
Approx. 321.8 g / 0.709 lb (main unit and battery)
Approx. 242.1 g / 0.534 lb (main unit and terminal cap)
Battery
-
DMW-BLK22 (li-ion battery pack: 7.2V, 2200mAh, 16Wh) (sold separately)
Battery Life* (CIPA standard)
-
Approx. 730 images (rear monitor) with DC-G9M2 and H-ES12060
* One in the camera and another in the battery grip.
Operation
-
Operation ON/OFF Switch
Shutter Button
Joystick
AF/AE LOCK Button
White Balance Button
ISO Sensitivity Button
Exposure Compensation Button
Front Dial
Rear Dial
Fn Button
Dust and Splash Resistant
-
Yes
*Dust and Splash Resistant does not guarantee that damage will not occur if this battery grip is subjected to direct contact with dust and water.
Operating Temperature
-
-10 - 40 °C / 14 - 104 °F
Operating Humidity
-
10 - 80 %RH (no condensation)
Standard Accessory
-
Terminal Cap