TK-CJ600-ZMA Faucet Water Purifier with the Long Lasting MicroClear4000 Filter Cartridge

See product page
Photo of TK-CJ600-ZMA Faucet Water Purifier with the Long Lasting MicroClear4000 Filter Cartridge

Product name

  • TK-CJ600

Dimensions (width x depth x height)

  • 135 mm (W) x 120 mm (D) x 75 mm (H)

Weight

  • Approx. 350 g (Approx. 490 g when full of water)

Water temperature when using the main unit

  • Purified Water : Under 35 °C (Unpurified/shower : Under 80 °C)

Minimum usable dynamic water pressure

  • 70 kPa

Filtration flow volume

  • 1.8 L / min [At water pressure 100 kPa]

Cartridge installed in the unit

  • TK-CJ600C-EX

Purification capacity

  • Free residual chlorine

    • 4000 L *1

  • Turbidity

    • 4000 L *2

  • Total trihalomethane

    • 4000 L *1

  • Bromodichloromethane

    • 4000 L *1

  • Dibromochloromethane

    • 4000 L *1

  • Bromoform

    • 4000 L *1

  • Tetrachloroethylene

    • 4000 L *1

  • Trichloroethylene

    • 4000 L *1

  • CAT (pesticide)

    • 4000 L *1

  • 2-MIB (mold smell)

    • 4000 L *1

  • Soluble lead

    • 4000 L *1

  • Benzene

    • 4000 L *1

  • Geosmin (mold smell)

    • 4000 L *1

  • Phenols

    • 4000 L *1

  • Carbon tetrachloride

    • 4000 L *3

Removable substances

  • Iron (particulate form)

    • Can be removed. *4

  • Aluminum (neutral)

    • Can be removed. *4

Replacement timing guideline for the filter (cartridge)

  • Approx. 1 year (10 L of purified water used a day) [Approx. 6 months (20 L of purified water used a day)] *5

Type of material used

  • ABS resin

Filter material

  • Non-woven fabric filter, Activated carbon, Ceramic, Hollow fiber membrane

Components which cannot be filtered out

  • Iron dissolved in water, heavy metals (silver, copper, etc.), salt (seawater)

Note

  • ・ All figures given are for a water temperature of 20 °C.・ This product cannot convert hard water into soft water.* 1: This value is for a removal rate of 80 % based on JIS S 3201 tests.* 2: This value is for a filtration flow volume of 50 % based on JIS S 3201 tests.* 3: This value is for a removal rate of 80 % based on specification standard tests (JWPAS B standards) stipulated by the Japan Water Purified Association (JWPA).* 4: This substance is for a removal rate of 80 % based on specification standard tests (JWPAS B standards) stipulated by the Japan Water Purified Association (JWPA). Note that it is not stipulated as part of purification capacity.* 5: This may be significantly shorter depending on the volume of water used, water quality and water perssure.