| Power source |
PoE (IEEE 802.3af compliant, Class 2 device)
or Power supply unit (VL-PS24 sold separately) |
| Power consumption |
PoE: Standby: 2.5 W / Operating: 5.1 W
VL-PS240: Standby: 2.6 W / Operating: 6.3 W |
| Dimensions (H x W x D) |
Approx. 141 x 100 x 28.5 mm |
| Weight |
Approx. 250 g |
| Operating environment |
Ambient temperature: Approx. -10 ℃ to +55 ℃
Relative humidity (non-condensing): up to 90 % |
| Talking method |
Hands-free |
| Network interface |
10BASE-T/100BASE-TX (Auto MDI/MDI-X) |
| Network protocol |
TCP/IP, UDP |
| Wiring |
UTP (cat.5e or higher) |
| Card reader (RFID) |
13.56 MHz (ISO/IEC 14443 Type A (MIFARE))
*2 50,000 RFID card keys can be registered to each Lobby Station. Each card key must be individually registered / updated (“Issue card”, “Lost / Found”, and “Delete”) to each Lobby Station with which it will be used.
There are no batch operations to register / update card keys to multiple Lobby Stations at the same time. |
| Expanded interface |
E-lock x 1 *Relay box VL-RLY1 is required (sold separately) |
| Video / Audio format |
Video: H.264, Audio: G.711 |
| Viewing angle |
Horizontally: Approx. 113°, Vertically: Approx. 69° |
| Image sensor |
1.3 M pixels CMOS sensor |
| Minimum illuminance required |
1 lx (within approx. 50 cm from the camera lens) |
| Lighting method |
LED lights |
| IP rating / IK rating |
IP54*3 / —
* Water resistance is only assured if lobb station/the door station installed correctly according to the instructions in the Operating Instructions, and appropriate water protection measures are taken. |
| Installation method |
Surface mount (mounting base supplied) |
| External material |
PC+ABS resin |
| Supported functions |
• Unlock individual doors via the RFID card (MIFARE)
• Theft detection buzzer |
