$ #,###.00 000 010 //panasonic-peru.ibrandiq.com/es/Widgets/Fluid/{0} //panasonic-peru.ibrandiq.com/Products/MultipleInStock/Fluid/{0}
Foto de Unidad de control de cámara CCU

Unidad de control de cámara CCU

AK-HCU200  
Power Supply: 100 V to 240 V AC, 50/60 Hz
Power Consumption: 170 W (Without CAMERA connected: 32 W)
Capacity for Supplying Power to a Camera: 190 V DC, 0.6 A
Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity: 10 % to 90 % (no condensation)
Dimensions (W x H x D): 424 mm × 88 mm × 400 mm
(16-11/16 inches × 3-7/16 inches × 15-3/4 inches)
Excluding protrusions
Weight: Approx. 6.6 kg (approx. 14.6 lb)
Video Output: HD SDI/SD SDI: 4 lines
(2 lines shared with picture monitor output*2)
Analog composite: 1 line
(1 line shared with picture monitor output*2)
Return Input: HD SDI/SD SDI: 2 lines
(switched depending on the setting)
VBS: 1 line
Prompter Input: 1 line, Analog composite
Reference Input: 1 line (1 loop-through line)
Black burst/tri-level*3
Microphone Output: 2 lines (XLR, 3-pin, male), 0 dBm/600 Ω
Intercom: XLR, 5-pin, female
Input: –55 dBu to –10 dBu
Output: 100 mW (max.)
COMMUNICATION: Intercom input/output: 2 lines (1/2*2)
(0 dBm, 600 Ω, RTS/4W*2)
PGM: 1 line, input (0 dBm/600 Ω)
Tally input: Red, Green, 1 input each
ROP interface: RS-422, 1 line, 12 V output
MSU interface: RS-422, 1 line, GPI for control
LAN port: 1 line (10Base-T/100Base-TX, RJ45, crossover cable, category 5 or above)
For computer connection
*2: Depending on the setting, only one of them can be selected at one time.  
*3: The black burst signal and tri-level sync signal of the reference input are recognized automatically.