CAMARA HD INTEGRADA AW-HE130
| Alimentación | DC 12 V (AC adaptor supplied) DC 42 - 57 V (PoE+ power supply) | |
|---|---|---|
| Consumo | 1.8 A (AC adaptor supplied) 0.6 A (PoE+ power supply) | |
| Temperatura ambiental | 0 °C to 40 °C (32 °F to 104 °F) | |
| Temperatura de almacenamiento | -20 °C to 50 °C (-4 °F to 122 °F) | |
| Rangos de Humedad | 20% to 90% (no condensation) | |
| Mass: | Approx. 3.1 kg (6.83 lb) [Including mount bracket] | |
| Dimensiones | 180 mm x 228 mm x 234 mm (7-3/32" x 9" x 9-3/16") (excluding protrusions, cable cover, direct ceiling mount bracket) | |
| Controlador soportado | AW-RP120, AW-RP50, AK-HRP200 | |
| Entrada | Conector de entrada | DC 12 V IN, G/L IN (BNC) BBS (Black Burst Sync), tri-level sync supported Locking to a color subcarrier is not possible with BBS. PoE+ (IEEE802.3at standard) |
| Salida | HD/SD SDI OUT: | SMPTE424/SMPTE292/SMPTE259 standards 75 Ω (BNCx1) |
| VIDEO OUT: | NTSC/PAL 1.0 V [p-p]/75 Ω (BNCx1) | |
| INPUT / OUTPUT: | ||
| LAN: | LAN connector for IP control (RJ-45) | |
| RS-422: | CONTROL IN RS-422A (RJ-45) | |
| Entrada MIC/LINE | φ3.5 mm stereo mini jack Input impedance: High impedance During MIC input -- Supported mic: Stereo mic (plug-in power, on/off switching via menu) Supply voltage: 2.5 V +/- 0.5 V, Mic input sensitivity: Approx. -40 dBV +/- 3 dBV (0 dB=1 V/Pa, 1 kHz) During LINE input -- Input level: Approx. -10 dBV +/-3 dBV | |
| FUNCIONES Y PERFORMANCE | Sensor de Imagen | 1/2.86-type Full-HD 3MOS |
| Lente | Motorized 20 zoom, F1.6 to F3.4 (f=4.5 mm to 90 mm; 35 mm equivalent: 32.13 mm to 642.5 mm) | |
| Foco | Switching between auto and manual | |
| Distancia Focal | Entire zooming range: 800 mm (2.62 ft) Wide end: 400 mm (1.31 ft) | |
| Color | 3MOS | |
| Iluminación Mínima | 2 lx (50%, F1.6, 36 dB) | |
| Resolución Horizaontal | 1000 TV lines Typ (Center area) | |
| Ganancia | Auto, 0 dB to 36 dB | |
| Frame mix*2: | 0 dB, 6 dB, 12 dB, 18 dB, 24 dB | |
| Velocidad de obturación | 59.94p/59.94i: | 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
| 29.97p: | 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 | |
| 23.98p: | 1/24, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 | |
| 50p/50i: | 1/60, 1/120, 1/250, 1/500,1/1000, 1/2000, 1/4000, 1/10000 | |
| 25p: | 1/25, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000,1/4000,1/10000 | |
| Synchro scan: | 59.94 Hz:60.15 Hz to 642.21 Hz, 50 Hz:50.15 Hz to 535.71 Hz | |
| Gamma: | HD, SD, FILMLIKE1, FILMLIKE2, FILMLIKE3, 0.30 to 0.75 (Manual setting) | |
| Balance de Blancos | AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K to 15000K) | |
| Variabilidad cromática | OFF, -99% to 40% | |
| Archivos de escena | Scene1, Scene2, Scene3, Scene4 | |
| Formato de salida | 1080/59.94p,1080/29.97p*3,1080/23.98p, 1080/59.94i,1080/29.97PsF,1080/23.98PsF, 720/59.94p,480/59.94p(i)*4,1080/50p,1080/25p*3, 1080/50i,80/25PsF,720/50p,576/50p(i)*4 | |
| Sistema de Sincronización | Internal/External synchronization (BBS/Tri-level sync) | |
| Método de instalación | Stand-alone (Desktop) or suspended (Hanging)*5 | |
| Control de cabezal de Camara/pan-tilt: IP Connecting Cable: | When connecting through a hub: LAN cable*6(category 5e or above, straight cable), max. 100 m (328 ft) When a hub is not used: LAN cable*6 (category 5 or above, crossover cable), max.100 m (328 ft) | |
| Camera/pan-tilt head control: RP Connecting Cable: | LAN cable*6 (category 5 or above, straight cable), max. 1000 m (3280 ft) RS-422A, AW series protocol | |
| Velocidad de control | 0.08°/s to 60°/s | |
| Rango de Paneo | +/-175° | |
| Rango de Tilting*7: | -30° to 210° | |
| Quietness: | NC35 or less | |
| Footnotes: | *1:It may be necessary to upgrade the version of the controller in order to support the unit. For details on upgrading, visit the support page on the following website. http://pro-av.panasonic.net/ *2:This cannot be configured when the format is 1080/29.97p, 1080/23.98p, 1080/29.97PsF 1080/23.98PsF, 1080/25p, or 1080/25PsF. *3:Native output *4:A "P" signal is output as HDMI output, an "I" signal is output as SDI and an analog output for output formats of 480/59.94p(i) and 576/50p(i). *5:To ensure safety, the unit must be secured using the mount bracket supplied. *6:Use of an STP (shielded twisted pair) cable is recommended.*7:Depending on the pan or tilt position, the camera may be reflected in the image | |
@2024 | Panasonic Sales Peru S.A.C. RUC 20610081992