Individual Control Systems

Energy Saving

・ECONAVI on/ off

Basic Operation

・Filter information*
・Outing function
・nanoe™ X*

Maintenance Function

・RC setting mode
・Test run
・Sensor information*
・Service check
・Simple/ Detailed settings
・Auto address

* Subject to the connected model.

Energy Saving

・ECONAVI on/ off
・Temperature auto return^*1
・Temperature setting range^*1
・Auto shutoff^*1
・Schedule peak cut^*1
・Repeat off timer^*1

Basic Operation

・Individual flap control (Lock individual flap only for 4-way cassette)^*1
・ON/ OFF timer^*1
・Weekly timer^*1
・Filter information^{*1 *2}
・Outing function
・Quiet operation mode^{*1 *2}
・Power consumption monitor^{*1 *2}
・Energy saving^{*1 *2}
・Ventilation^*1
・nanoe™ X^{*1 *2}

Maintenance Function

・Service contact address^*1
・RC setting mode
・Test run
・Sensor information^{*1 *2}
・Service check
・Simple/ Detailed settings
・Auto address^*3

Initial Settings

・Rotation operation^*1
・Backup operation^*1
・Support operation^*1

*1 Only with H&C Control App.
*2 Subject to the connected model.
*3 Only with remote controller operation.

Energy Saving

・ECONAVI on/ off
・Temperature auto return^*1
・Temperature setting range^*1
・Auto shutoff^*1
・Schedule peak cut^*1
・Repeat off timer^*1

Basic Operation

・Individual flap control (Lock individual flap only for 4-way cassette) ^*1
・ON/ OFF timer^*1
・Weekly timer^*1
・Filter information^*1*2
・Outing function
・Quiet operation mode^*1*2
・Power consumption monitor^*1*2
・Energy saving^*1*2
・Ventilation^*1
・nanoe™ X^*1*2

Maintenance Function

・Service contact address^*1
・RC setting mode
・Test run
・Sensor information^*1*2
・Service check
・Simple/ Detailed settings
・Auto address^*3

Initial Settings

・Rotation operation^*1
・Backup operation^{* 1}
・Support operation^{* 1}

*1 Only with H&C Control App.
*2 Subject to the connected model.
*3 Only with remote controller operation.

Energy Saving

・ECONAVI on/ off
・Temperature auto return
・Temperature setting range
・Auto shutoff
・Schedule peak cut
・Repeat off timer

Basic Operation

・Individual flap control (Lock individual flap only for 4-way cassette)
・ON/ OFF timer
・Weekly timer
・Filter information^*
・Outing function
・Quiet operation mode^*
・Power consumption monitor^*
・Energy saving^*
・Initial settings
・Ventilation
・nanoe™ X^*

Maintenance Function

・RC setting mode
・Test run
・Sensor information^*
・Service check
・Simple/ Detailed settings
・Auto address

Initial Settings

・Rotation operation
・Backup operation
・Support operation

* Subject to the connected model.

Basic Remote Controller ON/OFF

Operation mode changeover (Cooling/ Heating/ Dry/ Auto/ Fan)
Temperature setting (Cooling/ Dry: 18-30 deg, Heating: 16-30 deg)
Fan speed setting H/ M/ L and Auto.
Air flow direction adjustment. ECONAVI on/ off^*.

Time Function 24 Hours Real Time Clock

Day of the week indicator.

Weekly Programme Function

A maximum of 6 settings/day and 42 settings/week can be programmed.

Outing Function

This function can prevent the room temperature from changing when the occupants are out for a long time.

Sleeping Function

This function controls the room temperature for comfortable sleeping.

●Max. 8 indoor units can be controlled from one remote controller.
●Remote control by main remote controller and sub controller is possible.
●Max. 2 remote controllers (main remote controller and sub controller) can be installed for one indoor unit.

* Depending on the model, some menus cannot be used.

The CZ-RWS3 enables wireless control of all indoor units

When a separate receiver is set up in a different room, control from that room also becomes possible. Automatic operation by means of the emergency operation button is possible even when the remote controller has been lost or the batteries have been exhausted. In addition, there are other functions such as temperature setting, operation switching, airflow direction/fan speed setting, etc.

Ventilation independent operation is possible

When commercial ventilation fans or heat-exchange ventilation fans have been installed, they can be operated with this remote control (interlocked operation with the indoor unit or independent ventilation ON/OFF).

●Remote control by main remote controller and sub controller is possible.
●Max. 2 remote controllers (main remote controller and sub controller) can be installed for one indoor unit.

Up to 64 groups (max 64 indoor units) can be controlled divided into 8 timer groups

Six program operations (Operation/Stop/Local permission/Local prohibition) per day can be set in a program for one week

· Only operation, stop, give remote controller local permission, or prohibit local remote controller, and their respective combinations are possible. (e.g. Operation + local permission, stop + local prohibition, only local permission, etc.)
· Local prohibition and the combination of the three items of temperature setting, mode change, and operation/stop can be set at the time of installation.

Function for pausing the timer in national holidays through presets, and timer operation that can be stopped manually

· By setting holidays or operation stop within one week, the timer can be paused just for that week.
· All timer settings can be stopped with the timer “ON/OFF effective” button. (Return to timer operation is made by pressing the button again.)

●The power supply for the schedule timer is taken from one of the following.
1. Control circuit board (T10) of a nearby indoor unit (power supply wiring length: within 200m from the indoor unit).
2. System controller (power supply wiring length: within 100m from the indoor unit).
When the power supply for the schedule timer is taken from the control circuit board of the indoor unit, that indoor unit cannot be used with other control devices using the T10 terminal.
As operation mode and temperature settings are not possible with the schedule timer, it must be used together with a remote controller, a system controller, an intelligent controller, etc. Also, as it does not have an address setting function, the control function of a system controller etc. must be used for address setting.