Model composition | Main Monitor(VL-MWD272) x1, Door Station(VL-V522L) x1, Wireless monitor(VL-WD613) x 1 | |
---|---|---|
Maximum Connectable Units | Door Station | Up to 2 (1 included with VL-SWD272) |
Monitor | Up to 3 extension monitors (not including the main monitor) | |
Wireless Monitor | Up to 6 (1 included with VL-SWD272) *A total of up to 6 wireless sub monitors and extension monitors can be registered. | |
Wireless Repeater | Up to 2 (sold separately) | |
Connectable Devices | E-lock Release Support | Up to 2 (user supplied) |
PBX | Only Panasonic PBX | |
Convenience | Picture Recording | Internal memory: Up to 50 visitors/sessions (up to 8 still images per visitor/session) |
Night Vision | Yes (LED lights) | |
Touch Panel / Pan & Tilt | - / - | |
Voice Changer | Yes | |
Intercom call | Yes (between main monitor, wireless sub monitor and extension monitor) | |
Monitor | Power source | 220 - 240 V AC, 50/60 Hz |
Power consumption | Standby: Approx. 2.5W, During operation: Approx. 10W * Measurement conditions: VL-V522L (1 pcs.) is connected to the Main Monitor | |
Dimensions (H x W x D) | Approx. 158 x 243 x 29.5 mm (excluding protruding sections) | |
Mass (weight) | Approx. 875 g (including mounting bracket & AC cable) | |
Operating environment | Ambient temperature: Approx. 0 ℃ to +40 ℃, Relative humidity (non-condensing): up to 90 % | |
Display size | 7-inch wide colour / WVGA (800 x 480 pixels) | |
Display language | English, Arabic | |
Talking method | Hands-free | |
Frequency range | 1.88 GHz to 1.90 GHz | |
Installation method | Wall mount (mounting bracket supplied) | |
External material | Flame retardant PC+ABS resin, Flame retardant ABS resin | |
Door Station | Power source | Power supplied by the main monitor |
Dimensions (H x W x D) | Approx. 131 x 99 x 36.5 mm *Excluding protruding sections. | |
Mass (weight) | Approx. 200 g | |
Operating environment | Ambient temperature: Approx. -15 ℃ to +55 ℃, Relative humidity (non-condensing): up to 90 % (tested up to -20 ℃) | |
Talking method | Hands-free | |
Viewing angle | Horizontally: Approx. 87゜, Vertically: Approx. 66゜ | |
Image sensor/ Camera (pixel) | CMOS sensor (Approx. 0.3M pixels) | |
Minimum illuminance required | 1 lx (within approx. 50cm from the camera lens) | |
Lighting method | LED lights | |
IP rating (INGRESS PROTECTION) | IPX3 *Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken. | |
Installation method | Surface mount (mounting base supplied) | |
External material | Flame retardant ABS resin | |
Wireless Monitor | Power source | Rechargeable Ni-MH (AAA x 2) |
Dimensions (H x W x D) | Approx. 173 x 52 x 30 mm (excluding protruding sections) | |
Mass (weight) | Approx. 160 g (including the batteries) | |
Operating environment | Ambient temperature: Approx. 0 ℃ to +40 ℃, Relative humidity (non-condensing): up to 90 % | |
Display size | 2.2-inch colour / QVGA (320 x 240 pixels) | |
Frequency range | 1.88 GHz to 1.90 GHz | |
Operating time | Standby use: Approx. 80 hours *When used fully charged in an operating temperature of 20 ℃. | |
Charging time | Approx. 8 hours *When the operating temperature is 20 ℃. The charging time may increase when the operating temperature is lower than this. | |
Transmitting range | Approx. 100 m (line-of-sight distance from the main monitor) | |
External material | ABS resin | |
Charger | Power source | AC adaptor, Output: 5.5 V DC, 0.5 A |
Power consumption | Standby: Approx. 0.4 W (when the sub monitor is not placed in the charger) During charging: Approx. 1.4 W | |
Dimensions (H x W x D) | Approx. 43 x 81 x 76 mm (excluding protruding sections) | |
Mass (weight) | Approx. 70 g (excluding the AC adaptor) | |
Operating environment | Ambient temperature: Approx. 0 ℃ to +40 ℃, Relative humidity (non-condensing): up to 90 % | |
External material | ABS resin |
Copyright © 2023 Panasonic Malaysia Sdn Bhd.
Registration No. 197601000977 (26975-W).