$ #,###.00 000 010 //panasonic-newzealand.ibrandiq.com/en/Widgets/FluidPanNZ/{0} //panasonic-newzealand.ibrandiq.com/Products/MultipleInStock/FluidPanNZ/{0}
Photo of PT-DZ770ES

PT-DZ770ES

Power Supply 120 V AC, 8 A, 50 / 60 Hz, 220-240 V AC, 4.5 A, 50 / 60 Hz
Power Consumption 120 V AC 830 W (880 VA) (0.2 W when STANDBY MODE set to ECO*1, 6 W when STANDBY MODE set to NORMAL)
220-240 V AC 810 W (1,000 VA) (0.3 W when STANDBY MODE set to ECO*1, 8 W when STANDBY MODE set to NORMAL)
Dissipation BTU U models: max. 2,924 BTU/hour E, EJ models: max. 2,822 BTU/hour
DLP™ Chip Panel Size 17.0 mm (0.67 inches) diagonal (16:10 aspect ratio)
Display Method DLP™ chip x 1, DLP™ projection system
Pixels 2,304,000 (1,920 x 1,200) pixels
Lens PT-DZ770K / DW740S / DX810S Powered zoom (throw ratio 1.7-2.4:1), powered focus F 1.7-1.9, f 25.6-35.7 mm
PT-DZ770LK / DW740LS / DX810LS Optional powered zoom / Focus lenses and fixed-focus lens
Lamp 300 W (max. 310 W) UHM lamp x 2
Screen Size (diagonal) 1.27-15.24 m (50-600 inches), 1.27-5.08 m (50-200 inches) with the ET-DLE055, 16:10 aspect ratio
Brightness*2 7,000 lm (dual-lamp, LAMP MODE: NORMAL)
Centre-to-Corner Uniformity*2 90%
Contrast*2 2,500:1 (full on/full off, CONTRAST MODE: HIGH*3)
Resolution 1,920 x 1,200 pixels
Scanning Frequency HDMI / DVI-D fH: 15-91 kHz, fV: 50-85 Hz, dot clock: 25-162 MHz
RGB fH: 15-91 kHz, fV: 50-85 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR) fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
Video /
S-Video
fH: 15.75 kHz, fV: 60 Hz [NTSC / NTSC4.43 / PAL-M / PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL / PAL-N / SECAM]
Optical Axis Shift*5 Vertical +50 % from centre of screen (powered)
Horizontal ±10 % from centre of screen (powered)
Keystone Correction Range Vertical: ±40 ° (±30 ° with the ET-DLE055 / DLE080)
Installation Ceiling / floor, Front / rear
Terminals HDMI IN HDMI 19-pin x 1 (Deep Colour*7, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF,
1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA (1,920 x 1,200)*8,
compatible with non-interlaced signals only, dot clock: 25-162 MHz
DVI-D IN DVI-D 24-pin x 1
(DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF,
1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA (1,920 x 1,200)*8,
compatible with non-interlaced signals only, dot clock: 25 -162 MHz
RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR x 1)
RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB / YPBPR / YCBCR x 1)
VIDEO IN BNC x 1 (composite video)
S-VIDEO IN Mini DIN 4-pin x 1 (S-Video)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN M3 x 1 for wired remote control
REMOTE 1 OUT M3 x 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Cabinet Materials Molded plastic
Dimensions
(W x H x D)
PT-DZ770K / DW740S / DX810S 498 x 175*9 x 466 mm (19-19/32" x 6-7/8"*9 x 18-11/32")(with supplied lens)
PT-DZ770LK / DW740LS / DX810LS 498 x 175*9 x 432 mm (19-19/32" x 6-7/8"*9 x 17") (without lens)
Weight*10 PT-DZ770K / DW740S / DX810S Approximately 16.3 kg (35.9 lbs) (with supplied lens)
PT-DZ770LK / DW740LS / DX810LS Approximately 15.4 kg (34.0 lbs) (without lens)
Operating Environment Operating temperature: 0-45 °C (32-113 °F)*11, operating humidity: 20-80 % (no condensation)
Supplied Accessories Power cord, power cord secure lock, wireless/wired remote control unit,
batteries (R6/AA type x 2), software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control Software) (x 1)
NOTE * Product numbers vary depending on the market. The general guideline is as follows: The product number in the Americas and Taiwan is PT-DZ770KU/DZ770LKU, PT-DW740SU/DW740LSU, and PT-DX810SU/DX810LSU. The product number in Europe, CIS, Asia (except Taiwan), Oceania, Middle East, and Africa is PT-DZ770KE/DZ770LKE, PT-DW740SE/DW740LSE, and PT-DX810SE/DX810LSE.

*1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 Brightness becomes 3,500 lm with contrast mode set to high.
*4 Brightness becomes 4,000 lm with contrast mode set to high.
*5 Optical axis shift function cannot be operated when used with the ET-DLE055.
*6 +45% from centre of screen with the ET-DLE080.
*7 For the PT-DZ770K /DZ770LK only.
*8 Compliant with VESA CVT-RB.
*9 With legs at shortest position.
*10 Average value. May differ depending on the actual unit.
*11 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the HIGH ALTITUDE MODE is set to ON (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level) . Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in HIGH ALTITUDE mode) when the projector is being used with LAMP SELECT set to DUAL and LAMP POWER set to NORMAL, the light output may be reduced approximately 20 % to protect the projector.