$ #,###.00 000 010 //panasonic-newzealand.ibrandiq.com/en/Widgets/FluidPanNZ/{0} //panasonic-newzealand.ibrandiq.com/Products/MultipleInStock/FluidPanNZ/{0}
Photo of PT-VW340ZA

PT-VW340ZA

Power Supply 100-240 V AC, 50/60 Hz
Power Consumption 100-120 V AC: 300 W, 220-240 V AC: 280 W (0.4 W when STANDBY MODE set to ECO,1.3 W when STANDBY MODE set to Network, 9 W when STANDBY MODE set to Normal.)
LCD panel Panel size 15.0 mm (16:10 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Pixels 1,024,000 (1,280 x 800) x 3, total of 3,072,000 pixels
Lens 1.6x manual zoom (throw ratio: 1.2-1.9:1), manual focus, F 1.60-2.12, f 15.30-24.64 mm
Lamp 230 W x 1, lamp replacement cycle (lamp power: Normal/Eco1/Eco2): 4,000 hours/5,000 hours/6,000 hours*2
Screen size (diagonal) 0.76-7.62 m, 4:3 aspect ratio
Brightness*3 3,700 lm (input signals: PC, lamp power: Normal, picture mode: Dynamic)
Centre-to-corner uniformity*3 85%
Contrast*3 3,000:1 (full on/off) (input signals: PC, lamp power: Normal, picture mode: Dynamic, IRIS: On)
Resolution 1,280 x 800 pixels*4
Scanning frequency HDMI fH: 15-80 kHz, fV: 50-85 Hz, dot clock: 162 MHz or lower
RGB (analog) fH: 15-100 kHz, fV: 50-100 Hz, dot clock: 162 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)
YPBPR (YCBCR) fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift 49:1 (fixed)
Keystone correction range Vertical: ±40°
(±30° when using AUTO)
(maximum value of XGA input),
horizontal: ±30°
(maximum value of XGA input)
Installation Ceiling/floor, front/rear
Terminals HDMI IN HDMI 19-pin x 1 (compatible with HDCP, Deep Color)
480i*5, 480p, 576i*5, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p,
1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200),*6
audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
COMPUTER 1 IN D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
COMPUTER 2 IN / MONITOR OUT D-sub HD 15-pin (female) x 1 (RGB x 1), (input/output selectable using on-screen menu)
VIDEO IN Pin jack x 1 (Composite VIDEO)
S-VIDEO IN Mini DIN 4-pin x 1 (S-VIDEO)
AUDIO 1 IN M3 x 1 (L-R x 1)
AUDIO 2 IN (MIC IN) M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
AUDIO 3 IN Pin jack x 2 (L, R x 1)
AUDIO OUT M3 x 1 (L-R x 1) for output (variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
LAN RJ-45 x 1 (for network connection, 10BASE-T/100BASE-TX, compliant with PJLink™)
Built-in speaker 4.0 cm round shape x 1, output power: 10.0 W (monaural)
Noise level*3 35 dB (lamp power: Normal), 29 dB (lamp power: Eco1, Eco2)
Cabinet materials Molded plastic
Dimensions (W x H x D) 352 x 98.0*7 x 279.4*8 mm
Weight*9 Approx. 3.3 kg
Operating temperature 0°C-40°C
(less than 1,400 m above sea level, HIGH ALTITUDE MODE: OFF),
0°C-30°C
(between 1,400 m and 2,000 m above sea level,
HIGH ALTITUDE MODE: HIGH 1),
0°C-30°C
(between 2,000 m and 2,700 m above sea level,
HIGH ALTITUDE MODE: HIGH 2)
Operating humidity 10-80 % (no condensation)
Supplied accessories Power cord x 1,
batteries (AAA/R03/LR03 type x 2), computer cable x 1,
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software
*1 When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate.
Also, only certain commandscan be received for external control using the serial terminal.
*2 This is the maximum value when the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time,
the lamp replacement cycle will shorten. The usage environment affects the duration of the lamp.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*5 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).
*6 Compliant with VESA CVT-RB.
*7 With legs at shortest position.
*8 Including protruding parts.
*9 The above values are averages. Actual values may be different according to the product.