LJ-SK84A Li-ion Storage Battery System |
Battery |
Technology |
Lithium-ion |
Usuable Capacity |
8 [kWh] |
Battery Input |
Nomial Input Voltage |
150.0[V] [111[V] - 165[V]] |
AC Output [Grid Tied] |
Connection Type |
Single phase 2 wire |
Rated AC Voltage |
230[V] |
Rated Frequency |
50 [Hz] |
Rated Power [Input/Output] |
-2.0[kW] / 2.0[kW] |
Rated Current [Input/Output] |
-8.7[Arms] / 8.7 [Arms] |
Back-up |
Connection Type |
Single phase 2 wire [n-phase ground] |
Rated AC Voltage |
230[V] |
Rated Frequency |
50 [Hz] |
Maximum Outpt |
1.0[kVA] |
Environment |
Ambient Temp. Sensor in battery module |
0-40℃ * Discharge -10 - 40℃ |
Ambient Humidity |
-90[%Rh] * Non condensing |
Maximum Altitude |
1000[m] |
Standard |
Safety |
AS/NZS 3100 [2009] |
Grid |
AS/ NZS 4777-1/-2/-3/-[2005] |
EMC |
IEC61000-3, IEC61000-6 |
User Interface |
7seg 5 Digit LED with 4 buttons |
Dimensions |
W:966mm x H:1380mm d D:279mm |
Weight |
159kg |
Colour |
Ivory |
Conditions of Installation |
IP54 |
Space required for installation |
Front: 800mm Left: 50mm; Right: 200mm; Back: 50mm; Top: 200mm |
Do Not Install |
Where salt damage may occur or near corrosive gases, etc |
LJ-NA02 Network Adaptor |
Power Entry Characteristic |
Input |
AC230V ± 10% [50/60Hz] |
Withstand Voltage |
AC1500V/1 min |
Insulation Resistance |
100M Ohm or more. Measurement by 500V Insulation Resistance Tester |
Network Interface [Lan Port] |
Ethernet |
100BASE-TX/ 10BASE-T |
Number of Port |
1 |
Type of Connector |
RJ-45 |
Communication Protocol |
HTTPS over IPv4 |
Serial interface [RS-485] |
Conneciton Method |
2-wire |
Transfer Rate |
9600bps |
Communication Protocol |
Modbus RTU |
Recommend Cable |
PVC Flexible cable 2C 0.75sq mm |
Length of Cable |
Max. 50m |
Environmental |
Ambient Temperature |
0-40℃ |
Ambient Humidity |
Max. 85[%Rh] *Non condensing |
Maximum Altitude |
1000[m] |
Standard |
Safety |
IEC60950.1 |
EMC |
CISPR22, CISPR24 |