U2 Type 4-Way Cassette
Flat design that harmonizes with interiors and excellent air purification functionality
U2 Type 4-Way Cassette units have a flat design and a built-in drain pump that allows for flexible installation and design options that blend in with interiors and buildings. They also offer the next level of air quality thanks to the nanoe X Generator Mark3, effective even in large spaces.
Please Select Your User Type
U2 Type 4-Way Cassette
Specs
S-22MU2E5BN
S-28MU2E5BN
S-36MU2E5BN
S-45MU2E5BN
S-56MU2E5BN
S-60MU2E5BN
S-73MU2E5BN
S-90MU2E5BN
S-112MU2E5BN
S-140MU2E5BN
S-160MU2E5BN
nanoe X Generator Mark3- ECONAVI
- R410A
- DC motor
New high-performance turbo fan, new path system for heat exchanger
Lower noise in slow fan operation
Industry top lightweight, easy piping
Easy installation structure of the panel
ECONAVI: Floor temperature and human sensor added
Inside cleaning by 100x nanoe™ + dry control
Documents
Combination
Case Studies
Features
A New Level of Air Quality with nanoe X Generator Mark3
24-hour nanoe™ X Air Protection
nanoe™ X inhibits certain bacteria, viruses, pollens, allergens, mould, and hazardous substances contained in PM2.5. Providing effective deodorisation and improving the quality of your air. nanoe™ X functions in both cooling and fan modes, and is maintenance-free, helping you enjoy 24 hours of quality air while keeping your costs down.
Higher Concentration, Even in Large Space
The amount of hydroxyl radicals generated increased 100 times, compared to the original nanoe™, which achieves greater effectiveness even in large spaces of 112 m².
Conditions of the simulation ･Room size: 112 m² ･Room height: 2.4 m ･Inspection model: 4-Way Cassette ･Position of IDU: Centre
Note: The result is based on the conditions for the simulation and it may differ from the concentration measured in an actual room. nanoe™ particles are extremely tiny in nano-meter size. They cannot be seen, so the concentration image is solely for illustrative purposes.
Note: The result is based on the conditions for the simulation and it may differ from the concentration measured in an actual room. nanoe™ particles are extremely tiny in nano-meter size. They cannot be seen, so the concentration image is solely for illustrative purposes.
Effective at Eliminating Odours in Only 30 Minutes
The nanoe X Generator Mark3 reduces odours by as much as 1.8 levels* in just 30 minutes. This is half the time required to achieve the same effect compared to the conventional nanoe X Generator Mark 2.
*A 1.8 level decrease in odour intensity is equivalent to a reduction of 95% or more.
[Odour intensity] 5: Very strong odour, 4: Strong odour, 3: Easily detectable odour, 2: Weak, recognisable odour (cognitive threshold concentration), 1: Barely detectable odour (detection threshold concentration), 0: No odour
**Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P80U6 equipped with a nanoe X Generator Mark2 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 60 minutes (L19YK032-01) ***Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P160U6 equivalent tester equipped with a nanoe X Generator Mark3 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 30 minutes (R21HM003-0)
[Odour intensity] 5: Very strong odour, 4: Strong odour, 3: Easily detectable odour, 2: Weak, recognisable odour (cognitive threshold concentration), 1: Barely detectable odour (detection threshold concentration), 0: No odour
**Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P80U6 equipped with a nanoe X Generator Mark2 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 60 minutes (L19YK032-01) ***Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P160U6 equivalent tester equipped with a nanoe X Generator Mark3 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 30 minutes (R21HM003-0)
Inside Cleaning Function to Suppress Mould Growth
After cooling/drying operation, the inside of the indoor unit is automatically dried.* nanoe™ X is activated to suppress mould growth.
*If you wish to set the inside cleaning function off, use the wireless remote controller to turn the function off. Please consult an authorized dealer for setting.
Note: The product image shown is for illustration purposes only and may not be an exact representation of the product.
Note: The product image shown is for illustration purposes only and may not be an exact representation of the product.
Industry-Leading Airflow for Cooling Comfort
Cools the Area Quickly
3D Turbo Fan
The Turbo Fan with Twisted 3D Blades delivers big and powerful airflow.
Powerful Airflow
Powerful airflow instantly makes spaces comfortable and cool.
Note: This table shows values for the airflow rate in high mode.
Delivers Cool Air from High Ceilings
Longer Airflow
A wider main flap and sub-flap increase airflow, and a wider-angle jetting port creates a longer airflow. Cool air can reach from a maximum height of 5 meters, making even spaces with high ceilings and open spaces comfortable.
Note: 4-Way Cassette 11.2-16.0 kW type
Allows Ceiling Height to Be Maintained
The units can be installed in rooms with high ceilings, where they provide ample floor-level heating in the winter.
1. 4-way discharge high ceiling setting 2
2. 3-way discharge with the optional air-blocking materials
3. 2-way discharge with the optional air-blocking materials
1. 4-way discharge high ceiling setting 2
2. 3-way discharge with the optional air-blocking materials
3. 2-way discharge with the optional air-blocking materials
*When using the unit in a configuration other than the factory settings, it is necessary to make settings on-site to increase airflow. **Use air-blocking materials (CZ-CFU3) to completely block two discharge outlets for 2-way airflow.
Delivers Cool Air to Every Corner of Spaces
Wide Flap
The air delivered in four directions from the wide flap creates a 360 degree airflow, spreading cool air to every corner of spacious environments. Thus, the entire room is cooled, ensuring the comfort of your customers and staff.
360° Thermograph
The curves on the room temperature distribution graph expand gently out in a circle centred on the indoor unit.
Simulation conditions: 14.0 kW 4-Way Cassette 140MU type in cooling mode / Floor area of 225 m² / Ceiling height of 3 m
Flat Horizontal Design That Conditions the Interior
Panasonic believes that one of the most important elements of design is that it doesn’t interfere with the overall room interior. The flat horizontal design of the 4-Way Cassette achieves an elegant yet simple form. This design allows it to protrude only 33.5 mm from the ceiling, to blend naturally into a variety of interiors, including offices and restaurants.
Energy Efficiency
ECONAVI Sensor
Providing outstanding energy-saving performance, Panasonic’s inverter VRF System can be connected to ECONAVI to detect when energy is being wasted. ECONAVI senses the presence or absence of people and the level of activity in each area of an office. When unnecessary heating or cooling is detected, indoor units are individually controlled to match office conditions for energy-saving operation.
1. Detection of the level of activity enables optimum power saving.
2. Sensor is remotely located to maximise the energy-saving effect.
1. Detection of the level of activity enables optimum power saving.
2. Sensor is remotely located to maximise the energy-saving effect.
ECONAVI Can Be Added Without Compromising Aesthetics
A newly put humidity sensor on the air suction part achieves more comfort and energy-saving operation. ECONAVI function operates based on activity amount and comfort and energy saving based on temperature and humidity. It works in case of low humidity during cooling operation and high humidity during heating operation. New circulate function and movement detection improve comfort.
Leading Control Options
Panasonic air conditioning systems allow flexible control options. Individual, centralised, Cloud control and WLAN control are all possible. Please consult with a Panasonic air conditioning specialist for advice as to which control solution best suits your system requirements.
Flexible Installation
The horizontal design of the 4-way cassette achieves an elegant designed panel. Its slim design allows protruding 256-319 mm from the ceiling.
Built-in drain pump allows flexible installation and design options with up to 850 mm lift. Long horizontal piping is also possible.
